Operating voltage: AC 100~240 volts, DC10~28 volts
Charge power: Max. 300 Watts
NiCd/MH: 1~17 Cells
LiIo/LiPo/LiFe: 1~6 Cells
Charge current: 0.05-20.0A
Discharge current: 0.05-20.0A
SMALL SIZE BIG POWER
High Power,High Current,High-Performance Power Conversion Circuit
This charger uses advance Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This is not only save power and reduce heat build up but also makes the charger more compact and conveniently mobile.
Support Many Kinds of Battery
The charger can be used with Lipo,Lilo,LiFe,Ni-Cd,NiMH and Pb battery.
Convenient set of 10 battery profile memories that can be saved and loaded by number,
Various Charging/Discharging Settings and Cycles
For lithium batteries: balance charging,normal charging,fast charging,storage,discharging,ext-discharging,charge/discharge cycling and battery monitoring.
For NiCd/NiMH batteries: charging-auto,charging-manual,discharging,charge/discharge cycling and forming charge.
For Pb batteries: charging and discharging.
Unique Lithium Battery Expanding Discharging Program
When you connect the external capacity resistance,you can use it as the maximum discharge power capacity - 600W(30V/20A).
Unique Lithium Battery Monitor Program
When you use other equipment to charge or discharge a Lithium pack,you can use the charger to monitor the per-cell voltages,battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long,the charge will generate an alarm sound and the related information will blink.
In this mode,the charge acts as a convenient power supply for a hot wire foam cutter.
Battery Interior Resistance Measurement
The charger can not only measure the internal resistance of the battery pack,and also can measure the per-cell internal resistance (only available for lithium battery).
Perfect Protection Function
The charger has protection for reversed polarity(input or output),low input voltage,battery temperature,charging capacity and time overrun.
Electric Motor Test Mode
This mode can be used to run-in electric motors,test motor parameters and performance,check tolerances etc.
The charger has a 16Mbit flash storage,which can log offline charge and discharge data in 36 hours.
Note: This charger doesn't come with the AC adapter and cord.
24 X Charsoon 300W 20A Antimatter AC DC 2-24V Balance Charger